Netgear FVS318N – Prosafe Wireless N VPN Firewall 快速安装指南
Basic IPv6 WAN and LAN Configuration
3
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Use a DHCPv6 Server to Configure an IPv6 Internet
Connection
The wireless VPN firewall can autoconfigure its ISP settings through a DHCPv6 server by
using either stateless or stateful address autoconfiguration. These options are explained in
the following procedure.
using either stateless or stateful address autoconfiguration. These options are explained in
the following procedure.
To automatically configure the WAN port for an IPv6 connection to the Internet:
1.
Select Network Configuration > WAN Settings > Broadband ISP Settings.
2.
In the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings:
Figure 1.
3.
In the Internet Address section of the screen, from the IPv6 drop-down list, select DHCPv6.
4.
In the DHCPv6 section of the screen, select one of the following radio buttons:
•
Stateless Address Auto Configuration. The wireless VPN firewall generates its
own IP address by using a combination of locally available information and router
advertisements, but receives DNS server information from a DHCPv6 server. The IP
address is a dynamic address.
own IP address by using a combination of locally available information and router
advertisements, but receives DNS server information from a DHCPv6 server. The IP
address is a dynamic address.
•
Stateful Address Auto Configuration. The wireless VPN firewall obtains an
interface address, configuration information such as DNS server information, and
other parameters from a DHCPv6 server. The IP address is a dynamic address.
interface address, configuration information such as DNS server information, and
other parameters from a DHCPv6 server. The IP address is a dynamic address.