Xerox Xerox Mobile Print Cloud Support & Software 用户指南
6. Select Delete.
Note
To make sure the printer is no longer seen, you will need to remove the printer from
each Agent that has the printer in its discovery parameters.
each Agent that has the printer in its discovery parameters.
How To Enter a Range of Printers for my
Agent
Agent
Perform a printer discovery on your agent:
1. From the webpage, select Agents > Edit > Discovery Settings > Add Setting > IPv4
1. From the webpage, select Agents > Edit > Discovery Settings > Add Setting > IPv4
range.
2. Enter a Start Address and End Address and click Save.
You may enter individual IP addresses or a range of IP addresses to include more
printers. Discovery of large ranges is slower. If the range includes many IP addresses
that are not printers to be used by Mobile Print Cloud, it may create unnecessary
network traffic because the solution attempts to communicate with each IP address.
This IP discovery scan is run multiple times each day.
printers. Discovery of large ranges is slower. If the range includes many IP addresses
that are not printers to be used by Mobile Print Cloud, it may create unnecessary
network traffic because the solution attempts to communicate with each IP address.
This IP discovery scan is run multiple times each day.
How To Edit Printer Discovery Settings for
an Agent
an Agent
1. From the webpage, select Agents > Edit > Discovery Settings.
2. Select Edit for the discovery setting you want to change.
3. Make the desired changes and select Save.
2. Select Edit for the discovery setting you want to change.
3. Make the desired changes and select Save.
How To Change a Site’s GPS Coordinates
You can change a site to pinpoint a printer more specifically by changing the Latitude
and Longitude settings. From the webpage, select Sites, find your site, and select Edit.
and Longitude settings. From the webpage, select Sites, find your site, and select Edit.
Xerox
®
Mobile Print Cloud
2-8
Administrator How To and Troubleshooting Guide
How To