Xerox Phaser 7500 用户指南
Network Basics
Phaser 7500 Color Printer
User Guide
47
IPv6
This section includes:
•
•
•
•
•
•
Enabling IPv6
IPv6 can be enabled or disabled independently of IPv4.
Note:
If you disable both IPv4 and IPv6, you will lose your connection to the printer. For
information on restoring the default TCP/IP settings, see
To enable/disable IPv6, use one of the following options:
•
The printer’s control panel
•
CentreWare IS
Using the Control Panel
To enable/disable IPv6 on the control panel:
1. Select
Printer Setup > Connection Setup > Network Setup > TCP/IPv6 Setup, then press the OK
button.
2. Select
IPv6, then press the OK button to switch between On and Off.
Using CentreWare IS
To enable/disable IPv6 using CentreWare IS:
1. Launch your Web browser.
2. Enter your printer’s IP address in the browser’s
Address field.
3. Click
Properties.
4. Select the
Protocols folder on the left navigation panel, then click TCP/IP.
5. Click the
TCP/IP (v6) button.
6. Select the
TCP/IP v6 Enabled check box to enable TCP/IP v6.
7. Click the
Save Changes button at the bottom of the page.