Xerox Phaser 4600/4620 管理员指南
CentreWare Internet Services
Phaser 4600/4620
System Administrator Guide
System Administrator Guide
114
Properties
The properties tab is used to configure machine settings.
Description
The Description Page displays the machine model and serial number and provides fields for the entry
of location, Xerox asset number and customer asset number information.
of location, Xerox asset number and customer asset number information.
Tray Settings
The Tray Settings page allows you to set the Mode, Prompt option and Sequence settings for the
machine’s media trays.
machine’s media trays.
Mode
Each tray can be set to one of the following modes:
•
Static - The paper size and type is specified by the user when loading the tray.
•
Dynamic - The paper size and type are dictated by the print job being sent. The tray is selected
using the printer driver.
using the printer driver.
•
Permanent - The paper size and type is permanently set and cannot be changed by the user
during paper loading. The paper type and size requested must be loaded.
during paper loading. The paper type and size requested must be loaded.
•
Bypass - Allows a print job to start or continue by accepting any paper loaded into Tray 1 (Bypass),
and print on that paper, regardless of what the print job specifies.
and print on that paper, regardless of what the print job specifies.
Prompt
If this option is enabled for a tray a prompt to change the tray settings is displayed when the tray is
opened and closed.
opened and closed.