Xerox Phaser 750 安装指南
32
PhaserShare Networking Manual
TCP/IP Host Configuration (UNIX)
SGI IRIX 5.3 and 6.x
Modify the /etc/hosts file to identify the printer to the workstation:
Note
You need superuser privileges to edit this file.
1.
Log onto your system as root.
2.
Make a backup copy of the /etc/hosts file.
3.
Edit /etc/hosts and add a line that defines the printer's IP address and its name. The IP
address you enter here for the printer must be the same address you specified as the
printer's IP address when it was configured. The name is the name by which your
workstation identifies the printer.
address you enter here for the printer must be the same address you specified as the
printer's IP address when it was configured. The name is the name by which your
workstation identifies the printer.
IRIX 5.3 and IRIX 6.x with Impressario Client
The following procedure describes how to use the SGI Printer Manager program to
configure a workstation running IRIX 5.3 and IRIX 6.x with Impressario Client to support a
color PostScript printer.
configure a workstation running IRIX 5.3 and IRIX 6.x with Impressario Client to support a
color PostScript printer.
1.
From the Toolchest, click System/Printer Manager, or type printers at the command
line.
line.
2.
Click Printer, then select Add from the pull-down menu.
3.
Fill in the fields (refer to the following table). Click OK.
Field name
Description
New Printer Name
Name of the print queue (this can be anything).
Connection Type
Select Network.
Remote Host Name
The name that you entered in your /etc/hosts file
as the remote machine name.
as the remote machine name.
Remote Printer Queue Name
Queue name that the printer recognizes:
■
PS for PostScript
■
PCL for text
■
HPGL for HP7475A
■
AUTO for automatic selection.