Xerox DocuColor 12 Printer with Fiery EX12 安装指南
7
7-13
Starting and shutting down the Fiery
Shutting down the Fiery
You may need to shut down the Fiery for service. When you do so, fonts downloaded
to the hard disk drive are not deleted. Print jobs in the Hold and Printed queues and
jobs that have been processed but not printed are not deleted and are available for
printing when you restart the Fiery.
to the hard disk drive are not deleted. Print jobs in the Hold and Printed queues and
jobs that have been processed but not printed are not deleted and are available for
printing when you restart the Fiery.
T
O
SHUT
DOWN
THE
F
IERY
1.
Make sure the Fiery is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle. If a job has just finished
processing or printing, wait at least five seconds after the Control Panel status message
changes to Idle before proceeding.
processing or printing, wait at least five seconds after the Control Panel status message
changes to Idle before proceeding.
N
OTE
:
If a job from the Print queue is processing, it will continue processing and print
after the Fiery is restarted; if a job to the Direct connection is processing, it will not
finish processing or printing.
finish processing or printing.
2.
Press the Menu button to display the Functions menu.
3.
Use the Down arrow button to scroll to the last screen, and choose Shut Down.
4.
Use the line selection button to choose Shut Down System.
Proceed to the next step when the screen displays the message, “It is now safe to power
off the server.”
off the server.”
5.
Turn off the Fiery by moving the power switch on the back to the Off position.
N
OTE
:
After turning off the Fiery, turn off the copier.