Xerox DocuColor 12 Printer with Fiery EX12 安装指南

Token Ring is an alternative network architecture to the Ethernet architecture. Token 
Ring networks offer a high resistance to failure and are commonly used in large or 
high-traffic network installations.

Token Ring networks operate by passing a network token around the electronic 
equivalent of a ring. The token is a data packet that circulates from one network 
node to another, controlling access to the network. In practice, each workstation is 
connected to a port on one or more media attachment units (MAUs) that act as 
network hubs for the ring connection.

This appendix describes the Token Ring option and cable connections and refers you 
to the remaining configuration required for printing to the Fiery.

The Fiery supports Token Ring networks that use IPX and TCP/IP protocols. To use 
the Fiery with a Token Ring network, you must install a Token Ring network interface 
card provided by EFI. You can use either shielded twisted pair (STP) or unshielded 
twisted pair (UTP) cable.

The service/support center that installs the Fiery typically also installs the Token Ring 
option at the same time and configures the Fiery to enable printing.