Xerox DocuColor 12 Printer with Fiery EX12 安装指南
A
A-3
Token Ring Network Option
IPX/SPX installations
If your network uses IPX/SPX protocols with Token Ring, configure at least one
printer, one Fiery Print Server, and one Fiery Print Queue on the NetWare server as
described in
printer, one Fiery Print Server, and one Fiery Print Queue on the NetWare server as
described in
on page 2-10. You can
configure up to eight bindery servers and one NDS tree connection to the Fiery.
This total is the same whether the Fiery is connected by Token Ring, Ethernet, or
both. For more information, see
This total is the same whether the Fiery is connected by Token Ring, Ethernet, or
both. For more information, see
TCP/IP installations
If your network uses TCP/IP protocols with Token Ring, configure at least one
printer and one Fiery queue on a Windows NT server (see
printer and one Fiery queue on a Windows NT server (see
(see
Setting up Token Ring on the Fiery
Token Ring Setup on the Control Panel is similar to Ethernet Setup. From Network
Setup, perform Port Setup, Protocol Setup, and Service Setup. The setups you need are
summarized in the table on
Setup, perform Port Setup, Protocol Setup, and Service Setup. The setups you need are
summarized in the table on
N
OTE
:
Connect the Token Ring cable before doing Fiery Network Setup, so that the
Token Ring card can configure itself properly.
Setting up NetWare Windows clients
Client setup is exactly the same as for IPX clients using Ethernet. For details, see