Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页
Getting to Know Your Product
10
Product Orientation Guide
8. If the jam is behind the right front door, see Figure
9. Press the bottom green handle (marked 7) down
to clear paper from the baffle. Return the handle
to the up (closed) position.
to the up (closed) position.
10. Press the top green handle (marked 8) to the left
to clear paper in the transport area at the rear of
the bins. Return the handle to the right (closed)
position.
the bins. Return the handle to the right (closed)
position.
11. Close the door.
12. Push the sorter/mailbox back against the printer.
12. Push the sorter/mailbox back against the printer.
Clearing jams behind the front door
Demonstrate opening the front door on the copier.
See Figure 18.
See Figure 18.
Be careful. The fuser is hot and you may
get burned.
get burned.
Point out the access areas inside the printer used for
jam clearance. See Figure 19.
jam clearance. See Figure 19.
1. Rotate the green latch handle clockwise and pull
out the paper path module until it is fully open.
2. Lift the baffle (marked 1) and remove jammed
paper. Press the baffle gently back into place.
3. Remove any paper from the entry to the fuser.
4. Push the green handle (marked 2) to the right
and remove any paper from the exit area of the
fuser. Gently secure the handle back into place.
fuser. Gently secure the handle back into place.
5. Lower the green handle (marked 3) and remove
any paper from the aligner baffle.
8
10
9
Figure 17
Figure 18
1
2
3
4
5
6
7
Figure 19