Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页

Getting to Know Your Product

Product Orientation Guide

Performing routine tasks

Loading paper in tray 1

Demonstrate the steps as you describe them. See
Figure 6.

You have four paper trays. To load paper in tray 1:

Note: Tray 1 is preset to hold up to 500 sheets of
A4. paper.

Face the DocuColor 12 Printer so that you are
directly in front of the paper trays.

4. Open the tray by pulling it straight out.

5. Take the paper out of the wrapper.

6. Place the stack of paper in the tray as shown.

Add paper up to the Max line. Straighten the
paper stack so the edges are even.

7. Close the tray by pushing it in toward the

printer.

Loading paper in trays 2, 3, and 4

Note: Paper trays 2, 3, and 4 can hold up to 550
sheets of paper. Sizes can be adjusted from 8 x 10 to
A3.

1. Open the tray by pulling it straight out.

2. Place paper in the tray, pushing the paper all the

way to the left. Straighten the stack so the edges
are even.

3. Adjust the rear paper guide by squeezing the

release and sliding the paper guide toward the
front of the printer until it just touches the stack
of paper.

4. Adjust the right paper guide by squeezing the

release and sliding the paper guide to the left
until it just touches the stack of paper.

5. Close the tray by pushing it in toward the

printer.

Figure 6

Figure 7