Xerox DocuColor 12 Printer with Splash G630 用户指南
CopyCal
86
Splash G630 User Guide
CopyCal
CopyCal is a standalone application that creates
profiles that allow the Splash server to emulate the
output of any color printer. CopyCal is launched from
the Splash server. CopyCal and the Splash server
application can run at the same time. The printer must
be running during the entire calibration procedure.
profiles that allow the Splash server to emulate the
output of any color printer. CopyCal is launched from
the Splash server. CopyCal and the Splash server
application can run at the same time. The printer must
be running during the entire calibration procedure.
CopyCal Profiles
CopyCal profiles are a special class of profile that
combine CMYK and RGB color correction into a
single selection.electing a CopyCal profile in the
CMYK profile list overrides any RGB color
correction setting for that job. No CopyCal profiles
are provided at Install.
combine CMYK and RGB color correction into a
single selection.electing a CopyCal profile in the
CMYK profile list overrides any RGB color
correction setting for that job. No CopyCal profiles
are provided at Install.
CopyCal Calibration
Calibrate with Splash CopyCal as follows:
1.
With the printer running, double-click the
CopyCal icon on the Splash server main screen. The
CopyCal interface appears.
CopyCal interface appears.
2.
Print the CopyCal targets from Acrobat to the
selected printer via the standard print driver for that
printer. The targets may be printed from any Mac or
Windows client computer. The targets are numbered 2
to 4.
printer. The targets may be printed from any Mac or
Windows client computer. The targets are numbered 2
to 4.
3.
Click Calibrate in the main calibration window.
CopyCal prints a reference target, which is labeled #1.
4.
Place the Kodak Gray Scale target and the
CopyCal target #1 face-down on the scanner surface.
Match the arrow on the target with the arrow on the
back of the scanner platen glass, and orient the target
with the short edge of the paper along the left side of
the scanner platen.
Match the arrow on the target with the arrow on the
back of the scanner platen glass, and orient the target
with the short edge of the paper along the left side of
the scanner platen.
If the wrong target is placed on the glass, a CopyCal
error message appears, stating that it cannot find
registration marks. Before proceeding, re-start the
procedure.
error message appears, stating that it cannot find
registration marks. Before proceeding, re-start the
procedure.
5.
Click Scan. CopyCal scans the target and
determines current color performance based on the
acquired image.
acquired image.
If the wrong target was placed on the glass, a CopyCal
error message appears, stating that it could not find
registration marks. Before proceeding, restart the
CopyCal procedure.
error message appears, stating that it could not find
registration marks. Before proceeding, restart the
CopyCal procedure.
6.
Repeat Steps 5 and 6 for targets 2, 3, and 4.
7.
A prompt appears, asking for a profile name.
Name the profile and save it. The CopyCal profile
created can now be selected as a custom CMYK
profile. If the profile already exists, CopyCal prompts
to replace the profile. Cancelling allows the user to
select a new name.
created can now be selected as a custom CMYK
profile. If the profile already exists, CopyCal prompts
to replace the profile. Cancelling allows the user to
select a new name.
Note!
Upon startup, CopyCal senses if it is
attached to a DC 12 CP with a built-in
scanner or a DC 12 LP which uses an
external scanner.
attached to a DC 12 CP with a built-in
scanner or a DC 12 LP which uses an
external scanner.