Xerox DocuColor 12 Printer with Splash G630 用户指南
Splash G630 User Guide
85
Editing Percentages
ColorCal creates custom color profiles by editing
curve definition percentages. This feature allows easy
and accurate curve definition using information
derived from other sources. ColorCal is able to match
only the shape of the curve on output, not the exact
numbers entered.
curve definition percentages. This feature allows easy
and accurate curve definition using information
derived from other sources. ColorCal is able to match
only the shape of the curve on output, not the exact
numbers entered.
1.
Select a color profile to edit from the popup
menu.
2.
Select a color curve to edit from the floating color
curve palette. The Edit Table button is disabled when
the Master curve is selected.
the Master curve is selected.
3.
Select the Edit Table button. The edit table
dialog appears with the current output values for each
input percentage displayed.
input percentage displayed.
4.
Enter new values for any and all levels. If an out
of range value is entered, it is corrected immediately
to the nearest in range value. For new-style, the range
is 0.0 to 100.0. The edit table dialog does not accept
negative numbers.
to the nearest in range value. For new-style, the range
is 0.0 to 100.0. The edit table dialog does not accept
negative numbers.
5.
Select OK to save the changes or Cancel to
discard all changes.
6.
Select Save to overwrite the existing profile or
Save As… to create a new profile.
•
The Save option is disabled when factory profiles
are selected because factory profiles are not editable.
•
When using Save As…, enter a profile name for
the new profile and then click Save.
•
The new profile name appears in the list of color
profiles in the Set Active Profile dialog box. Note that
the new profile is automatically calibrated to the last
time calibration was run as it is created.
the new profile is automatically calibrated to the last
time calibration was run as it is created.
7.
Select OK. ColorCal prompts to save changes or
cancel if OK is selected before saving a profile.
Creating Color Profile Sets
Color Profile Sets created using multiple calibrations
can be saved with unique names. Each named profile
can be selected to use with a particular paper tray. The
same profile can be used for multiple trays.
can be saved with unique names. Each named profile
can be selected to use with a particular paper tray. The
same profile can be used for multiple trays.
To create a profile set:
1.
Choose Edit Color Profile Sets from the
ColorCal menu.
2.
Click Add.
3.
Enter a name for the profile set.
4.
When calibrating the copier/printer, choose the
name of the profile set to calibrate from the ColorCal
Options dialog box. Follow the instructions described
in “Calibrating the Printer” on page 79.
Options dialog box. Follow the instructions described
in “Calibrating the Printer” on page 79.
To specify calibration from different sets to paper
trays:
trays:
1.
Choose Color Profile Sets from the Splash
server’s Server menu.
2.
For each tray, choose the profile set to use.
3.
Click OK.
Managing the Profiles Folders
Splash color profiles are located in the “Splash Color
Data” folder in the Preferences folder within the
System folder. This folder contains three profiles
folders.
Data” folder in the Preferences folder within the
System folder. This folder contains three profiles
folders.
To delete a color profile, be sure it is not selected in
the Set Active Profiles dialog box then remove the file
from the Old Style Profiles folder or Calibration
Sources folder.
the Set Active Profiles dialog box then remove the file
from the Old Style Profiles folder or Calibration
Sources folder.
Note!
Undo is not supported in the edit
table dialog box.
table dialog box.