Xerox DocuColor 12 Printer with Splash G630 用户指南
Editing Custom Color Profiles (Expert Mode)
Splash G630 User Guide
83
4.
If Tray 5/Manual Feed is selected, choose a paper
size from the menu that appears and feed that paper
size through the bypass tray. Select either normal,
heavy weight, or extra heavy paper.
size through the bypass tray. Select either normal,
heavy weight, or extra heavy paper.
5.
ColorCal prints an AutoGray target on the
printer.The target always shows the currently
calibrated printer performance minus any adjustments
made as a result of previously running AutoGray.
calibrated printer performance minus any adjustments
made as a result of previously running AutoGray.
6.
ColorCal prompts the user to examine the target
for printing defects.
7.
If printing defects such as creased paper or
uneven or flaking toner appear on the target, click
Reprint to produce a new target on the printer.
Reprint to produce a new target on the printer.
8.
When an acceptable Calibration target prints,
click Continue. ColorCal prompts to place the target
on the scanner glass.
on the scanner glass.
9.
Place the Kodak Gray Scale target and the printed
target face-down on the scanner surface. Match the
arrow on the target with the arrow on the back of the
copier platen glass.Position the target with the short
edge of the paper along the left side of the copier
platen. The Gray Scale target must cover the grayscale
patches in the upper-left corner of the ColorCal target.
To do this, place the Gray Scale target face-down on
the glass first, then place the ColorCal target face-
down on top of the Gray Scale target.
arrow on the target with the arrow on the back of the
copier platen glass.Position the target with the short
edge of the paper along the left side of the copier
platen. The Gray Scale target must cover the grayscale
patches in the upper-left corner of the ColorCal target.
To do this, place the Gray Scale target face-down on
the glass first, then place the ColorCal target face-
down on top of the Gray Scale target.
10. Click Scan. ColorCal scans the Target and
determines current gray balance based on the acquired
image.
determines current gray balance based on the acquired
image.
11. Click Verify to check calibration results for the
printer or click Done to return to ColorCal.
printer or click Done to return to ColorCal.
For the Verify pass, ColorCal prints an AutoGray
target which has had the gray balance adjusted.
target which has had the gray balance adjusted.
The CMY ramp and the K ramp on the right side of
the target should match closely.
the target should match closely.
Editing Custom Color Profiles
(Expert Mode)
(Expert Mode)
Splash ColorCal provides expert-level tools for
creating custom (user-defined) CMYK profiles or
modifying the calibrated CMYK profiles provided
with ColorCal. Only the calibrated CMYK profiles
can be edited. To create a new profile, save an existing
profile under a new name then modify the new profile.
Splash ColorCal provides the following methods of
editing profiles
creating custom (user-defined) CMYK profiles or
modifying the calibrated CMYK profiles provided
with ColorCal. Only the calibrated CMYK profiles
can be edited. To create a new profile, save an existing
profile under a new name then modify the new profile.
Splash ColorCal provides the following methods of
editing profiles
•
Control point editing.
•
Adjusting gain in Shadows, Midtones, and
Highlights.
•
Entering percentages for new-style profiles, or
densities for old-style profiles.
densities for old-style profiles.
To edit a color profile, select Be an Expert in the
Splash ColorCal window. The Splash ColorCal edit
window appears.
Splash ColorCal window. The Splash ColorCal edit
window appears.
Color profile
Color
Locked
cannot
curve
be edited
profiles
palette
menu
Click to edit
control points
Click to enter
percentages
and densities
and densities