Xerox DocuColor 12 Printer with Splash G620 用户指南

10. Close the copier platen cover then click Run Calibration.

11. Select a paper source for the ColorCal calibration target. The paper size can be 8.5"x11”, A4, or 

larger. Tray 5 offers the option of selecting “Heavy Weight” paper.

If you select Tray 5 choose a paper size from the menu that appears.

ColorCal prints a calibration target on the copier/printer. The target shows uncalibrated printer 
performance, even if the printer was recently calibrated.

12. ColorCal prompts to examine the target for printing defects.

13. If printing defects such as creased paper or uneven or flaking toner appear on the target, click 

Reprint to produce a new target on the copier/printer.

14. When an acceptable Calibration target prints, click Continue. ColorCal prompts to place the 

target on the copier surface for scanning.

15. Place the Kodak Gray Scale target (provided with Splash ColorCal) and the printed target 

face-down on the copier glass.

•

The Gray Scale target must cover the grayscale patches in the upper left corner of the 
ColorCal target. Place the Gray Scale target face down on the glass first, then place the 
ColorCal target face down on top of the Gray Scale target.

•

Match the arrow on the target with the arrow on the back of the copier platen glass.

•

Position the target with the short edge of the paper along the left side of the copier platen.

16. Click Scan. ColorCal scans the target and determines current color performance based on the 

acquired image. When this process finishes, ColorCal displays a graphic representation of color 
performance for the printer.

The Desired Density lines represent accurate CMYK printing for the current CMYK color 
profile selected in the Verify Against pop-up menu in the ColorCal Options dialog box (see 
page 109). The Measured Density lines show actual uncalibrated printer performance as 
measured from the scanned target.