Xerox DocuColor 12 Printer with Splash G620 用户指南
PN: 0016964-0101
Verifying Printer Color Accuracy
111
Chapter 9: Calibration
17. Click Update Profiles to have ColorCal adjust color output to match the Desired Density levels
for your color profiles.
ColorCal updates all profiles at the same time, even custom ones, so any color \profile can be
used immediately without repeating color calibration.
used immediately without repeating color calibration.
When profile updating is complete a message appears.
18. Click Verify to check calibration results for the printer (see “Verifying Printer Color Accuracy”
on page 111) or click Done to return to the ColorCal main window.
Color calibration is complete. After running calibration, select any of the standard color profiles
included with ColorCal for consistent, accurate color. See “Profile Sets” on page 117. If printer use
is heavy, use Splash ColorCal throughout the day to keep track of color printing performance and
recalibrate as needed (see “Verifying Printer Color Accuracy” on page 111).
included with ColorCal for consistent, accurate color. See “Profile Sets” on page 117. If printer use
is heavy, use Splash ColorCal throughout the day to keep track of color printing performance and
recalibrate as needed (see “Verifying Printer Color Accuracy” on page 111).
To exit ColorCal, choose Quit from the File menu.
Verifying Printer Color Accuracy
To verify the accuracy of the calibration, or to determine the amount of change since the last
calibration, click Verify Accuracy in the ColorCal main window or click Verify in the dialog box
that appears when calibration is complete. Follow the same steps used to initially calibrate the
printer. See “Calibrating the Copier/Printer” on page 108.
calibration, click Verify Accuracy in the ColorCal main window or click Verify in the dialog box
that appears when calibration is complete. Follow the same steps used to initially calibrate the
printer. See “Calibrating the Copier/Printer” on page 108.
When the verification process finishes, ColorCal displays the color performance results. Compare
the Desired Density lines with Measured Density lines to determine color printing accuracy. The
example below shows that measured output closely matches desired color performance.
Recalibration is not needed.
the Desired Density lines with Measured Density lines to determine color printing accuracy. The
example below shows that measured output closely matches desired color performance.
Recalibration is not needed.
Note!
The vertical axis for each color curve is in units of Status-T less the paper density. The horizontal
axis is represented as dot percentage from 0% to 100%.
axis is represented as dot percentage from 0% to 100%.