Xerox DocuColor 12 Printer with Splash G620 用户指南
PN: 0016964-0101
Calibrating the Copier/Printer
109
Chapter 9: Calibration
Splash ColorCal appears.
2.
If using ColorCal for the first time, or if the copier/printer has recently been serviced, choose
Calibrate Scanner from the ColorCal menu.
Calibrate Scanner from the ColorCal menu.
Calibrate Scanner adjusts the copier/printer to compensate for scanning differences that could
affect calibration quality. This command affects ColorCal operation only. It does not affect the
scanning capability of the copier/printer for other scanning operations.
affect calibration quality. This command affects ColorCal operation only. It does not affect the
scanning capability of the copier/printer for other scanning operations.
If you have calibrated at least once before, go to Step 10.
3.
Choose ColorCal Options from the Splash menu. A dialog box appears.
4.
Select the Randomize Patches option.
This option averages print density variations across the calibration target page, and produces
high-quality calibration. For best results, be sure this option is selected before you calibrate with
ColorCal.
high-quality calibration. For best results, be sure this option is selected before you calibrate with
ColorCal.
5.
Select Mirror Image to calibrate to heat transfer paper used for adhering color output to
non-standard media such as rice paper, rag paper, or T-shirts. To produce consistent color
output, use the original artwork for the calibration target and activate the Mirror Image option
before calibrating. This inverts the scanned artwork “target” to match the final transferred piece.
non-standard media such as rice paper, rag paper, or T-shirts. To produce consistent color
output, use the original artwork for the calibration target and activate the Mirror Image option
before calibrating. This inverts the scanned artwork “target” to match the final transferred piece.
6.
Select Save TIFF for Errors to help Splash Technology’s technical support determine the
cause in case a calibration fails.
cause in case a calibration fails.
7.
Select an option in the Verify Against menu to use a specific profile when printing the verify
target.
target.
8.
Select Calibrate All Sets if you want to calibrate all calibration profile sets. Otherwise choose
which profile set to calibrate from the Select Active Set menu. For information about creating
Calibration Sets, see “Creating Color Profile Sets” on page 116.
which profile set to calibrate from the Select Active Set menu. For information about creating
Calibration Sets, see “Creating Color Profile Sets” on page 116.
9.
Click OK.