Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

AutoCal error messages can result from problems during the AutoCal procedure.

Error 5

The calibration file cannot be opened.

Error 6

The calibration file was not read correctly.

Error 8

The measurement page did not scan properly, either because it is 
crooked or the data is corrupted.

Error 11

The color strips on the measurement page are inconsistent.

Error 12

The DocuColor 12 model being used is not supported.

Error 20

The measurement page cannot be scanned because the dots per inch 
(dpi) are incorrect.

Error 102

The grayscale strip is crooked or is positioned incorrectly.

Error 103

The grayscale strip is positioned too far to the left or to the right of the 
measurement page.

Error 104

The grayscale strip is positioned too far above the measurement page.

Error 111

The grayscale strip could not be found; either reposition the strip 
correctly or position it vertically.