Xerox ColorQube 8870 用户指南
Safety
ColorQube 8570/8870 Color Printer
User Guide
User Guide
12
Operational Safety
This section includes:
•
•
•
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.
printer.
Printer Location
•
Do not block or cover the slots or openings on the printer. These openings are provided for
ventilation and to prevent overheating of the printer.
ventilation and to prevent overheating of the printer.
•
Place the printer where there is adequate space for operation and servicing. For details, see
•
Place the printer in a dust-free area.
•
Do not store or operate the printer in an extremely hot, cold, or humid environment. For optimum
performance environmental specifications, see
performance environmental specifications, see
•
Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weight
of the printer. The base printer weight, without any packaging materials, is approximately 27.4 kg
(60.5 lb.).
of the printer. The base printer weight, without any packaging materials, is approximately 27.4 kg
(60.5 lb.).
•
Do not place the printer near a heat source.
•
Do not place the printer where it is directly exposed to the cold air flow from an air conditioning
system.
system.
•
Place the printer in an area within a temperature range of 10°–32°C / 50°–90°F and a relative
humidity range of 10–80% non-condensing.
humidity range of 10–80% non-condensing.
Operational Guidelines
•
Do not open or remove the paper source tray that you selected in either the printer driver or
control panel while the printer is printing.
control panel while the printer is printing.
•
Do not open the doors while the printer is printing.
•
Do not move the printer while it is printing.
•
Do not move the printer while the ink is still hot; wait 30 minutes for the printer to cool down after
shutting down using the shutdown sequence. For details, see
shutting down using the shutdown sequence. For details, see
•
Keep hands, hair, neckties, etc., away from the exit and feed rollers.
•
Use the printer at elevations below 2480 m (8,000 ft.)