Cisco Cisco 4402 Wireless LAN Controller 安装指南
7
Figure 3
Inserting the VPN Termination Module
Step 5
Gently but firmly press the VPN termination module
into the slot until it is firmly seated in the card electrical
connector. Use the provided captive screws to secure
the VPN termination module to the wireless LAN
controller. Tighten the screws to 4.5–5.5 in. lb.
into the slot until it is firmly seated in the card electrical
connector. Use the provided captive screws to secure
the VPN termination module to the wireless LAN
controller. Tighten the screws to 4.5–5.5 in. lb.
Step 6
Restore all power to restart the wireless LAN controller
(Figure 4).
(Figure 4).
a.
Insert power cord into controller. If the controller has
two power modules, insert both power cords.
two power modules, insert both power cords.
b.
Close the latch.
c.
Turn controller on.
Figure 4
Restoring Power
146193
146194
C
A
B