HP sas dl360 用户手册

 

1.  Be sure the server is in the proper operating environment with adequate 

power, air conditioning, and humidity control. Refer to the server 
documentation ("Environmental specifications" on page 

) for required 

environmental conditions. 

2.  Record any error messages displayed by the system. 

3.  Remove all diskettes and CDs from the media drives. 

4.  Power down the server and peripheral devices if you will be diagnosing the 

server offline. Always perform an orderly shutdown, if possible. This means 
you must: 

a.  Exit any applications. 

b.  Exit the operating system. 

c.  Power down the server ("Powering down the server" on page 

5.  Disconnect any peripheral devices not required for testing (any devices not 

necessary to power up the server). Do not disconnect the printer if you want 
to use it to print error messages. 

6.  Collect all tools and utilities, such as a Torx screwdriver, loopback adapters, 

ESD wrist strap, and software utilities, necessary to troubleshoot the 
problem.  

–  You must have the appropriate Health Drivers and Management Agents 

installed on the server.  

NOTE:  To verify the server configuration, connect to the System 
Management homepage and select Version Control Agent. The VCA 
gives you a list of names and versions of all installed HP drivers, 
Management Agents, and utilities, and whether they are up to date. 

–  HP recommends you have access to the SmartStart CD for value-added 

software and drivers required during the troubleshooting process.  

–  HP recommends you have access to the server documentation 

("Environmental specifications" on page 

) for server-specific 

information.