HP sas dl360 用户手册

 

•  If a fixed cable tray is available for the server, be sure the cords and cables 

connected to the server are correctly routed through the tray. 

•  Be sure each device is properly seated. 
•  If a device has latches, be sure they are completely closed and locked. 
•  Check any interlock or interconnect LEDs that may indicate a component is 

not connected properly. 

•  If problems continue to occur, remove and reinstall each device, checking the 

connectors and sockets for bent pins or other damage. 

 

To effectively troubleshoot a problem, HP recommends that you start with the 
first flowchart in this section, "Start diagnosis flowchart (on page 

follow the appropriate diagnostic path. If the other flowcharts do not provide a 
troubleshooting solution, follow the diagnostic steps in "General diagnosis 
flowchart (on page 

)." The General diagnosis flowchart is a generic 

troubleshooting process to be used when the problem is not server-specific or is 
not easily categorized into the other flowcharts.  

The available flowcharts include: 

•  Start diagnosis flowchart (on page 

•  General diagnosis flowchart (on page 

•  Power-on problems flowchart (on page 

•  POST problems flowchart (on page 

•  OS boot problems flowchart (on page 

•  Server fault indications flowchart (on page 

The number contained in parentheses in the flowchart boxes corresponds to a 
table with references to other detailed documents or troubleshooting instructions.  

 

Use the following flowchart to start the diagnostic process.