Autostart as-1414 用户手册

P. 4 

User Guide

 AS-1414/AS-1424

To ENTER Valet Mode 
1.

With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds. 

2.

The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  
The LED will turn

solid.

To EXIT Valet Mode 
1.

With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds. 

2.

The Parking Light will flash twice indicating the Module is now out of Valet Mode.  
The LED will turn 

.

Valet Mode Using the Valet Button 
(Available only of the plug-in Valet switch is installed)  

To put the system into Valet Mode: 

1.

Turn the key to the 

position.

2.

Press (for at least 1 second) and release the Valet Button. The L.E.D. will come 

.

To take the system out of Valet Mode: 

1.

Turn the key to the 

position.

2.

Press (for at least 1 second) and release the Valet Button. The L.E.D. will go 

.

The Valet button can only be used if the vehicle keys are in the 

position. 

Cold Weather Mode 

When Cold Weather Mode is active, the engine starts every 2 hours and runs for 4 minutes 
(or for 20 minutes with Diesel engines); the routine goes on for a period of 24 hours. 

To enter Cold Weather Mode: 

x

Press and hold the 

 button until the parking lights flash 3 times. 

To exit Cold Weather Mode, do any one of the following: 

x

Open the hood. 

x

Start the engine using the remote control. 

x

Turn the ignition key to the

position.

x

Press and hold the 

 button for 3 seconds 

(until the parking Lights flash once) 

x

Set the vehicle to Valet Mode. 

Remote Door Locks 

If your system was installed with the Remote Door Locks option, you will have the 
convenience of remote keyless entry. 
To  LOCK  your doors and  ARM  the Starter Kill: 

1.

Press and hold the 

 button for approx. 1 sec. 

2.

The parking lights will flash once and the L.E.D. will flash slowly to confirm that the 
doors have been locked and that the Starter Kill feature is enabled if it was 
installed.

1.

Press and hold the 

 button for approx. 1 sec. 

2.

The parking lights will flash twice and the L.E.D. will go out to confirm that the 
doors have been unlocked and that the Starter Kill feature is disarmed if it was 
installed.

Note: If installed and configured in Passive Mode at installation, the Starter Kill feature will 
rearm automatically 60 seconds after the doors are unlocked. For that reason, you may 
have to unlock your doors a second time if some time elapses before you actually start 
the engine.