Autostart as-1414 用户手册

AS-1414/AS-1424 User Guide 

P. 5

Arming the Starter Kill 

If installed, the Starter Kill can be programmed to arm in Active Mode (will not arm 
automatically) or in Passive Mode (will arm automatically). 
x To disarm the Starter Kill in Active or Passive Mode, press the 

 button on the trans-

mitter. The parking lights will flash twice. (If Remote Door Locks were installed, this will 
also unlock the doors.)  In Passive Mode, the system will automatically rearm 1 or 3 
minutes after the doors were unlocked. 

x To arm the Starter Kill in Active or Passive Mode, press and hold the 

 button on the 

transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this 
will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes 
after the engine is shut down. 

The system was designed with flexibility and OEM integration in mind. With its programmable 
options, this unit can single-handedly control nearly any electrical system in your vehicle.   

Note: The programming of these features should be left to a professional. Changing any 
one of the settings may adversely affect the operation the Module. 

The user-selectable options are as follows: 

x Remote door locks 

x Ignition-controlled door locks 

x Secure lock 

x Remote trunk release 

x Engine run time 

x Idle Mode 

x Starter Kill / Anti-Grind 

Remote Door Locks Option 

Your Module can be installed with the Remote door Locks option.

Ignition-controlled Door Locks Option

This is an added security feature. If your system was installed with the Ignition-controlled 
Door Locks option, the doors will automatically be locked as soon as the user presses the 
brakes while the ignition key is in the 

 position. 

When the key is turned to the Ignition 

 position, the doors will automatically be unlocked. 

(Only available if remote Door Lock Option is installed) 

Secure Lock Option 

Before it can remote-start your vehicle, the module must first disarm the factory security 
system.
The Secure Lock feature may be required on certain vehicle models with factory security 
systems that automatically unlock the doors when the security system is disarmed. 
To keep your vehicle protected when the factory security system is disarmed for a remote 
start, Secure Lock will relock your doors as soon as the vehicle has started. 
Once the engine run cycle ends, Secure Lock will rearm your factory security system. 

Remote Trunk Release Option 

If your system was installed with the Remote Trunk Release, you can open your trunk by 
pressing the

button on the remote transmitter.  Vehicles must have an electric 

switch or a remote 

 button on the vehicle’s OEM Transmitter for this option to be 

compatible with the Module. 

Engine Run Time 

(Gas 15 minutes, Diesel 20 minutes by default) If you have a gas engine, your system can 
be programmed to run the engine for 4, 15, or 25 minutes (15 minutes by default). If you 
have a diesel engine, it can be programmed to run the engine for 9, 20, or 30 minutes).