Korg triton-rack 信息指南

The effect section of the TRITON-Rack provides five 
insert effects

, two master effects, one master EQ (ste-

reo 3-band EQ), and a mixer that controls the routing of 
these components.
You can choose from 102 types of full-digital effects for 
each insert effect, and from 89 types for each master 
effect. The effects are categorized as follows.

Effects 000–089 can be selected for IFX1, 2, 3, 4, 5, 
or MFX 1 or 2. Effects 090–102 are double-size 
effects, and will use twice the processing area of 
other effects. They can be selected for IFX2, IFX3 or 
IFX4.

In Program mode, insert effects can be used as part of 
the sound-creating process, in the same way that the 
output sound of the oscillator (OSC) is processed by 
the filter and amp to create the final sound. Then the 
master effects

 can be used to apply spatial-type effects 

such as reverb. The stereo 3-band master EQ located 
immediately before the OUTPUT (MAIN) L/MONO 
and R outputs is used to make final adjustments in 
tone. These settings can be made independently for 
each program.

In Combination mode, and Multi mode, insert effects 
can be used to help create the sound of each timbre/
track. The master effects are used to apply overall spa-
tial processing, and the master EQ is used to make 
overall adjustments in tone.
These settings are made in Combination mode inde-
pendently for each combination, and in Multi mode for 
each multi the entire mode.

In Sampling mode, the sound of an external source 
that is input from AUDIO INPUT 1 and 2 can be pro-
cessed by the insert effects as the sound is sampled. 
Sampling mode settings are made by the “Input 1” and 
“Input 2” parameters of the SMPL 1.1: Recording, 
Input/Pref page. The settings here are valid only 
within Sampling mode.

The external input from AUDIO INPUT 1 and 2 can be 
used outside of Sampling mode. In Program, Combina-
tion, and Multi modes, the external input sound can be 
processed by the insert effects, master effects, and 
master EQ

.

This means that you can use the TRITON-Rack as a 2-
in/6-out effect processor. When 093: Vocoder is 
selected, the TRITON-Rack can be used as a vocoder 
effect processor in which its internal sounds are con-
trolled by an external mic input.

001–015

Filter and dynamics effects, such as EQ and com-
pressor

016–031

Pitch and phase modulation effects, such as chorus 
and phaser

032–040

Other modulation and pitch-shift effects such as 
rotary speaker and pitch shifter

041–051

Early reflection and delay effects

052–057

Reverb effects

058–089

Mono and mono-chain effects in which two mono 
effects are connected in series

090–102

Double-size effects