Korg triton-rack 信息指南

The note timing of the arpeggiator will depend on the 
setting of its “Key Sync.” check box.

If this is checked, the arpeggiator will begin operating 
at the moment that you play the first note-on after hav-
ing released all notes on the connected MIDI instru-
ment.
If this is unchecked, the arpeggiator will synchronize 
to the timing of the internal/external MIDI clock.

The following paragraphs explain how synchroniza-
tion occurs when the “Key Sync.” check box is 
unchecked. (Synchronization for Pattern Start and 
MIDI realtime command “Start” is an exception to 
this.)

In Combination, or Multi modes, the two arpeggiators 
can be operated simultaneously.
At this time if one arpeggiator is running and the other 
arpeggiator (whose “Key Sync.” is not checked) is 
started, the second arpeggiator will synchronize to the 
“

  (Tempo) ” based on the timing of the first arpeggia-

tor.

If “Key Sync.” is checked, arpeggiators A and B 
will operate with independent timing.

• If you start pattern playback while the arpeggiator 

is running, the arpeggiator will be reset to the 
beginning of the arpeggio pattern. (This is not 
affected by the “Key Sync.” setting.)

• If “Key Sync.” is not checked for pattern recording, 

you can turn on the [ARP ON/OFF] key and play 
the keyboard of a connected MIDI instrument 
during the recording pre-count so that the arpeggio 
pattern will start from the beginning at the instant 
that recording begins, and will be recorded.

• If you trigger the arpeggiator while a pattern is 

playing, the arpeggiator will synchronize to the 
beat of the pattern playback.

• If you want pattern playback to synchronize to the 

already-running arpeggiator, set “Sync” (MULTI 
5.1: RPPR, RPPR Setup page) to ARP (SEQ).
Pattern playback will synchronize to the 
“

 (Tempo)” timing of the arpeggiator.

When “

  (Tempo) ” is set to EXT (GLOBAL 2.1: MIDI, 

“MIDI Clock”), the arpeggiator will synchronize to 
MIDI Clock or Start messages etc. received from an 
external MIDI sequencer etc. connected via a MIDI 
cable.

• The arpeggiator will synchronize to the 

“

 (Tempo)” based on the timing of the external 

MIDI clock.

• If the MIDI realtime command “Start” is received 

while the arpeggiator is running, the arpeggiator 
will be reset to the beginning of the arpeggio 
pattern. (This is not affected by the “Key Sync.” 
setting.)