Konica Minolta kn-304 用户手册

KN-304 Network Board  2-7

Chapter 2  Setting up from the LCD Panel

■

 Setup for NetWare

To set up for printing by NetWare, you select “2. NetWare Setup” from the Network Setup menu.

Select “2. NetWare Setup” from the Network Setup menu, and the NetWare Setup menu appears as shown

below.  Press the number key associated with the desired menu item.  Press [Previous] to go back to the

previous menu.

●

 Server Name

Define the name of the NetWare print server given to the KN-304 Network Board.  The default is “KON_nnnnnn

(nnnnnn indicates its serial number)”.

●

 Server Password

Define the password of the NetWare print server.  The default is void.

●

 Queue Scan Rate

Enter a value, 1-255 (seconds), to designate the intervals in which the KN-304 Network Board looks for a

new print queue.  The default value is 1 (second).

●

 Frame Type

Select one out of the following as the frame type used in the LAN.  The default is [1. Auto].

1. Auto

2. Ethernet 802.3

3. Ethernet II

4. Ethernet SNAP

5. Ethernet 802.2