Konica Minolta kn-304 用户手册

2-8  KN-304  Network Board

Chapter 2  Setting up from the LCD Panel

●

 Disable Bindery

You can enable/disable the Bindery Service of NetWare 4.x and up.  Select Yes to enable and No otherwise.

The default is No.

●

 NDS Context

Designate the NDS context name (e.g. ou=standard.ou=organization_1).

●

 NDS Tree

Designate the NDS tree name.

■ 

Defining the password

Select [3. Password Protection] from the [Network Setup] menu to define the password.  If the password is

already defined, you have to type the right password in the window where you are urged to do that, after

pressing [Update NIC].  If you fail to respond with the right password (a number of 1-6 digits), you cannot

change network settings.

●

 Defining/changing the password

To define the password for the first time, type the password following [New password:] (you cannot enter

information following [Current password:]) and press the [Enter] button.  Then type the same password

following “Confirm password:” and press the [Enter] button.

To change the current password defined earlier, type the current password following [Current password:]and

press the [Enter] button.  Then type the new password following [New password:] and press the [Enter]

button.  Finally type again the new password following [Confirm password:] and press the [Enter] button.

●

 Disabling the password

To disable use of the password, press the [Disable] button in the [Password Protection] window.