Konica Minolta bizhub 164 用户手册

bizhub 164

11-5

The image is printed at an angle

Is the original positioned correct-
ly?

Correctly position the original 
against the Original Scale. 
(p. 3-6)

Are the Lateral Guide incorrectly 
positioned against the edges of 
the paper?

Slide the Lateral Guide against 
the edges of the paper.

Was curled paper loaded into the 
paper tray?

Flatten the paper before loading 
it.

The printed page is curled

Was paper that curls easily (as 
with recycled paper) used?

Remove the paper from the pa-
per tray, turn it over, then load it 
again.

Replace with new dry paper. 
(p. 3-4)

The edge of the printed image is 
dirty

Is the Original Pad dirty?

Clean the Original Pad with a 
soft cloth dampened with a mild 
detergent. (p. 10-9)

Was the selected paper size larg-
er than the original?
(With a zoom ratio setting of 
100%)

Select a paper size that is the 
same size as the original.
Or, make an enlarged copy at a 
zoom ratio appropriate to fit the 
paper size. (p. 5-5)

Is the size or orientation of the 
original different from that of the 
paper?
(With a zoom ratio setting of 
100%)

Select a paper orientation that is 
the same as that of the original.

Was the copy reduced to a size 
smaller than the paper?
(With a reduced zoom ratio spec-
ified)

Select a zoom ratio that adjusts 
the original size to the selected 
paper size.
Or, make a reduced copy at a 
zoom ratio appropriate to fit the 
paper size. (p. 5-5)

A message saying "Printer is not 
connected" or "Print Error" ap-
pears on the computer screen.

The printer driver specified when 
printing may not be supported by 
the printer controller.

Check the specified printer 
name.

The USB cable may be discon-
nected.

Check that the cable is correctly 
connected.

An error may have occurred on 
this machine.

Check the Display of this ma-
chine.

Memory may be insufficient.

Perform a test printing to check 
whether printing is possible.

Print processing on the compu-
ter finished, but printing does 
not start.

The printer driver specified when 
printing may not be supported by 
the printer controller.

Check the specified printer 
name.

The USB cable may be discon-
nected.

Check that the cable is correctly 
connected.

An error may have occurred on 
this machine.

Check the Display of this ma-
chine.

Unprocessed jobs may remain 
on this machine and be waiting 
to be processed.

Wait until the unprocessed job is 
processed.

Memory of the computer may be 
insufficient.

Perform a test printing to check 
whether printing is possible.

Cannot select items in the print-
er driver.

Some functions cannot be com-
bined.

Grayed out items cannot be con-
figured.

A "conflict" message saying 
"unable to configure" or "func-
tion will be canceled" appears.

You are trying to configure the 
functions that cannot be com-
bined.

Check carefully the functions you 
have specified, then specify the 
functions that can be combined.