Panasonic KXMB2178HK 操作指南

Important:
R The fax feature may not be available for your unit. See “y List of available features and equipment” on

We recommend programming the following so that they appear on the top of each page sent.
– Date and time (feature #101)
– Your logo (feature #102)
– Fax number (feature #103)

Important:
R Set the unit to the fax mode.

Set the original.

If necessary, change the resolution and contrast according to the type of document.

Dial the fax number or select the destination from stored items.

Start the fax transmission.
When using the scanner glass, press Mx/STARTN to scan the 1st page.
R To scan the next page, place the document and press MOK/SETN. Repeat this until all the documents are

scanned, then press Mx/STARTN.

When using the automatic document feeder (y), press Mx/STARTN.

Note:
R To change the contrast/resolution setting, see the following.

– "To select the contrast" (page 74)
– "To select the resolution" (page 74)

R If the line is busy or if there is no answer, the unit will automatically redial the number 2 or more times in the

following functions.
– Sending a fax
– Broadcast transmission (y)

– Redialling using MT/REDIALN
*1 For broadcast transmission, the line will be skipped and redialled later.

To select the contrast
Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available.
1. Md/QUALITYN (repeatedly): “CONTRAST”
2. MCDN: Change the contrast. A MOK/SETN

To select the resolution
1. Md/QUALITYN (repeatedly): “RESOLUTION”
2. MCDN: Change the resolution. A MOK/SETN

Note:
R If you select “FINE”, “SUPER FINE” or “PHOTO” resolution, transmission time will increase.

Store the desired names and telephone numbers into the address book beforehand (page 47).

74

8. . Fax