Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY 规格指南
1-50
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6513 Switch
Catalyst 6513 Switch
lists the features of the Catalyst 6513 switch chassis.
lists the specifications of the
Catalyst 6513 switch chassis.
shows a view of the Catalyst 6513 switch chassis.
Table 1-19
Catalyst 6513 Switch Features
Feature
Description
Chassis
•
Thirteen horizontal slots. Slots are numbered from (1) top to (13)
bottom.
bottom.
Supervisor Engines
•
Supports Supervisor Engine 2, Supervisor Engine 32, and Supervisor
Engine 720.
Engine 720.
–
Supervisor Engine 2 is installed in slot 1 and slot 2.
–
Supervisor Engine 1A is not supported.
–
Supervisor Engine 32 and Supervisor Engine 720 are installed in
slot 7 and slot 8.
slot 7 and slot 8.
–
Supervisor Engine 32 and Supervisor Engine 720 require that you
install the high-speed fan tray. You must also install a 2500 W or
higher capacity power supply in the chassis to power the high-speed
fan tray.
install the high-speed fan tray. You must also install a 2500 W or
higher capacity power supply in the chassis to power the high-speed
fan tray.
–
Supervisor Engine 720 has built-in switching fabric. Switch Fabric
Modules are not supported by Supervisor Engine 720 and cannot be
installed in the same chassis.
Modules are not supported by Supervisor Engine 720 and cannot be
installed in the same chassis.
•
The uplink ports are fully functional on all redundant supervisor engine
models when they are in standby mode.
models when they are in standby mode.
Note
Redundant supervisor engines must be configured identically.
Modules
•
Supports up to 12 Catalyst 6500 series modules.
•
WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be
installed in slot 7 or slot 8.
installed in slot 7 or slot 8.
•
WS-X6748-SFP, WS-X6748-GE-TX, and WS-X6704-10GE modules
are not supported in slots 2–8; they are supported in slots 9–13.
are not supported in slots 2–8; they are supported in slots 9–13.
–
Slots 1–8 support a single fabric channel; slots 9–13 support dual
fabric channels.
fabric channels.
•
Some Catalyst 6500 series modules may:
–
Not be supported
–
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
Check your software release notes for specific information.