Kenwood DNX874S 业主指南

 

Ñ

1) To prevent a short circuit, remove the key 

from the ignition and disconnect the 

¤ 

terminal of the battery.

2) Make the proper input and output wire 

connections for each unit.

3) Connect the speaker wires of the wiring 

harness.

4) Connect the wiring harness wires in the 

following order; ground, battery, ignition.

5) Connect the wiring harness connector to the 

unit.

6) Install the unit in your car.
7) Reconnect the 

¤ terminal of the battery.

8) Perform the Initial Setup.

See Initial setup (P.9).

 

Ñ

Bend the tabs of the 
mounting sleeve 
with a screwdriver 
or similar utensil and 
attach it in place.

 

Ñ

8

 or 9

8

 or 9

Car Bracket

•  Make sure that the unit is installed securely in 

place. If the unit is unstable, it may malfunction 
(eg, the sound may skip).

 

Ñ

1) Attach accessory 0 to the unit.

0