Kenwood DNX874S 业主指南

●

1) Cut out accessory 6 to meet the shape of the 

opening of the center console.

2) Attach accessory 6 to the unit.

6

Cut out to meet the shape 
of the opening in the 
vehicle.

●

1) Cut out accessory 6 as illustrated.

Cutting line

6

2) Fold double-sided adhesive (accessory 7) 

along the slit and attach it to accessory 6 
cut-out against the center rib as illustrated. 
Use 2 pieces of accessory 7 for 1 accessory 
6

 cut-out.

3) Attach accessory 6 cut-out to the unit.

7

 

Ñ

GPS antenna is installed inside of the car. It 

should be installed as horizontally as possible 

to allow easy reception of the GPS satellite 

signals.
To mount the GPS antenna inside your vehicle:
1) Clean your dashboard or other surface.
2) Remove the separator of the metal plate 

(accessory =).

3) Press the metal plate (accessory =) down 

firmly on your dashboard or other mounting 
surface. You can bend the metal plate 
(accessory =) to conform to a curved surface, 
if necessary.

4) Remove the separator of the GPS antenna 

(accessory -), and stick the antenna to the 
metal plate (accessory =).

=

-

•  Depending on the type of car, reception of the 

GPS satellite signals might not be possible with 
an inside installation.

•  Please install this GPS antenna in an area away 

from any antennas that are used with CB radios or 
satellite televisions.

•  The GPS antenna should be installed at a position 

that is spaced at least 12 inch (30 cm) from 
cellular phone or other transmitting antennas. 
Signals from the GPS satellite may be interfered 
with by these types of communication.

•  Painting the GPS antenna with (metallic) paint 

may cause a drop in performance.