Netgear 16100334 用户手册

This section provides answers for difficulties you might experience with the extender.

The extender is probably placed at the borderline of the range covered by the router or 
access point. For more information about where the place the extender, see 

If you are using WEP security, make sure that you are typing the network password in the 
correct field.

No. The extender is designed to connect wirelessly to the router or access point if it is in 
extender mode. If the extender is in access point mode, you can connect it to the router or 
access point with an Ethernet connection. For more information about access point mode, 
see 

On the login screen, click the Username & Password Help link to answer the security 
questions that you set up during the initial setup. For more information, see 

37.

If you cannot connect to the extender, determine what prevents you from connecting:

If you forgot your user name or password, click the Username & Password Help link. 
For more information, see 

If your browser displays an error page, include http:// in the address field of your browser 
by typing http://www.mywifiext.net.

If you already set up the extender but can no longer connect to it over WiFi, check to see 
if the Client Link LED is off or red.

If you cannot get a WiFi connection working, you can use an Ethernet cable to connect 
your computer to the extender. 

To join a WiFi network, you must know its network name (also called the SSID) so that you 
can select it. If the network is secure, you must know the passphrase or key. If the extender 
does not connect to the network that you select, the cause might be one of the following: