Xplore Technologies Corp of America IHWM622ANH 用户手册
14
English
ITE power adapter precautions
•
Use only the AC adapter and power cord approved for this Tablet PC or
Tablet PC accessory. Use of another type of AC adapter may risk fire or
explosion.
Tablet PC accessory. Use of another type of AC adapter may risk fire or
explosion.
•
Place the AC adapter in a ventilated area, such as on a desktop or the
floor, when you use it to run the Tablet PC or to charge the battery. Do
not cover the AC adapter with papers or other items that will reduce
cooling; also, do not use the AC adapter while it is inside a carrying case.
floor, when you use it to run the Tablet PC or to charge the battery. Do
not cover the AC adapter with papers or other items that will reduce
cooling; also, do not use the AC adapter while it is inside a carrying case.
•
Be sure that nothing rests on the AC adapter’s power cable and that the
cable is not located where it can be tripped over or stepped on.
cable is not located where it can be tripped over or stepped on.
•
Disconnect power cords and cables by grasping the connector, not by
pulling on the cable itself. As you pull out the connector, keep it evenly
aligned to avoid bending any connector pins. Before you connect a cable,
make sure both connectors are correctly aligned.
pulling on the cable itself. As you pull out the connector, keep it evenly
aligned to avoid bending any connector pins. Before you connect a cable,
make sure both connectors are correctly aligned.
For information about the medical power adapter (C5v only), see “Medical
power adapter precaution (C5v only)” below.
power adapter precaution (C5v only)” below.
Medical power adapter precaution (C5v only)
Additional equipment connected to medical electrical equipment must
comply with the respective IEC or ISO standards, such as IEC 60950-1 for data
processing equipment. Furthermore, all configurations shall comply with the
requirements for medical electrical systems (see IEC 60601-1 or clause 16 of
the 3Ed. of IEC 60601-1, respectively). Anyone connecting additional
equipment to medical electrical equipment configures a medical system and
is therefore responsible that the system complies with the requirements for
medical electrical systems. Attention is drawn to the fact that local laws take
priority over the above mentioned requirements. If in doubt, consult your
local representative or the technical service department.
comply with the respective IEC or ISO standards, such as IEC 60950-1 for data
processing equipment. Furthermore, all configurations shall comply with the
requirements for medical electrical systems (see IEC 60601-1 or clause 16 of
the 3Ed. of IEC 60601-1, respectively). Anyone connecting additional
equipment to medical electrical equipment configures a medical system and
is therefore responsible that the system complies with the requirements for
medical electrical systems. Attention is drawn to the fact that local laws take
priority over the above mentioned requirements. If in doubt, consult your
local representative or the technical service department.
Standard / directive references:
•
IEC/EN 60601-1+A1+A2: 1995: 6.8.2.c, 19.2.b, 19.2.c
•
IEC 60601-1: 2006: 7.9.2.5
•
MDD 93/42/EEC: Annex 1 clause 13.6.c
•
UL 60601-1, first edition
•
CAN/CSA C22.2 No. 601-1, first edition