Honeywell International Inc. CS19A 用户手册
3 - 14
For the new power setting to take effect, the scanner and base must be reset.
See
See
Reset Scanner and Base
Once the power level is set, you must scan the Reset Base bar code and
wait for the scanner to unlink and relink to the base. Once that is done,
scan the Reset Scanner bar code and wait for the base to unlink and relink
to the scanner.
scan the Reset Scanner bar code and wait for the base to unlink and relink
to the scanner.
Batch Mode
Batch mode is used to store bar code data when a scanner is out of range of its
base, or when performing inventory. The data is transmitted to the base once
the scanner is back in range or when the records are manually transmitted.
Note: Batch mode has limitations when using multiple scanners to one base. If
base, or when performing inventory. The data is transmitted to the base once
the scanner is back in range or when the records are manually transmitted.
Note: Batch mode has limitations when using multiple scanners to one base. If
a cordless system is being used in "multiple link mode," where up to 7
scanners are to be connected to one base, some accumulated or batched
scans could be lost if scanners are constantly being moved in and out of
range.
Automatic Batch Mode
stores bar code data when the scanner is out of range
of the base. The data is automatically transmitted to the base once the scanner
is back in range. When the scanner’s buffer space is full, any bar codes
is back in range. When the scanner’s buffer space is full, any bar codes
scanned generate an error tone. In order to scan bar codes again, the scanner
must be moved back into range of the base so data can be transmitted.
must be moved back into range of the base so data can be transmitted.
* Full Power
Medium Power
Medium Low Power
Low Power
: * : R E S E T _ . ³
Reset Base
Reset Scanner
Preliminary Draft