Honeywell International Inc. CS19A Manuale Utente

3 - 14

For the new power setting to take effect, the scanner and base must be reset.  
See 

Once the power level is set, you must scan the Reset Base bar code and 

wait for the scanner to unlink and relink to the base.  Once that is done, 
scan the Reset Scanner bar code and wait for the base to unlink and relink 
to the scanner.

Batch mode is used to store bar code data when a scanner is out of range of its 
base, or when performing inventory.  The data is transmitted to the base once 
the scanner is back in range or when the records are manually transmitted.  
Note: Batch mode has limitations when using multiple scanners to one base.  If 

a cordless system is being used in "multiple link mode," where up to 7 

scanners are to be connected to one base, some accumulated or batched 

scans could be lost if scanners are constantly being moved in and out of 

range.

 stores bar code data when the scanner is out of range 

of the base.  The data is automatically transmitted to the base once the scanner 
is back in range.  When the scanner’s buffer space is full, any bar codes 

scanned generate an error tone.  In order to scan bar codes again, the scanner 
must be moved back into range of the base so data can be transmitted. 

: * : R E S E T _ . ³

Preliminary Draft