Adtran TRC3202 用户手册
Section 4, Network Turnup Procedure
TRACER 2210/3202 System Manual
36
© 2002 ADTRAN, Inc.
61280012L1-1A
TRACER 3202 RIU
Power for the TRACER 3202 RIU is provided by the TRACER 2210 DIU over a twisted pair. To power-up
the TRACER 3202, properly connect the RIU to the DIU using the custom cable assembly (see Cable
Assembly on page 33).
the TRACER 3202, properly connect the RIU to the DIU using the custom cable assembly (see Cable
Assembly on page 33).
8.
MOUNTING OPTIONS
TRACER 2210 DIU
The TRACER 2210 DIU may be installed for tabletop or wall-mount configuration. Use the 4 mounting
slots on the base of the TRACER 2210 housing for wall-mount configurations.
slots on the base of the TRACER 2210 housing for wall-mount configurations.
TRACER 3202 RIU
The TRACER 3202 RIU is provided for mast mount installation. Use the provided mounting bracket when
installing the unit on the external pole or tower.
installing the unit on the external pole or tower.
Figure 3. Connecting the TRACER 3202 Rope Tethers
Disconnect power from the TRACER 2210 before connecting to the TRACER 3202
RIU. Power-up the TRACER 2210 after the cable assembly has been properly
created and connected to both units.
RIU. Power-up the TRACER 2210 after the cable assembly has been properly
created and connected to both units.
Connect the provided wire rope tethers around the L-shaped cutout on the mounting
bracket to protect the housing clamp and housing cover from falling during installation
and maintenance (see Figure 3).
bracket to protect the housing clamp and housing cover from falling during installation
and maintenance (see Figure 3).
Housing Clamp Tether
Housing Cover Tether
Mounting Bracket