Zebra Technologies Corporation P430I-UHF 用户手册
20
P430i User’s Manual
980470-001 Rev. A
Installation and Setup
Card Output Hopper
Card Output Hopper
The card output hopper is normally extended to receive the printed cards. The printer may be operated with the
card output hopper in its closed position; in this case the cards will not be collected in the output hopper.
card output hopper in its closed position; in this case the cards will not be collected in the output hopper.
1.
Pull the card output hopper out to place it in its functional position.
2.
When not using the printer, slide the card output hopper back into its closed position to protect the printer
from dust and protect the output hopper from damage.
from dust and protect the output hopper from damage.
3.
The output hopper can be completely removed from the printer if necessary by inserting a thin, blunt object
(such as a pencil) up through the hole in the bottom of the printer enclosure and pressing (up) to release the
hopper while simultaneously pulling the hopper out. To re-install the output hopper, simply slide the output
hopper in until it locks in place.
(such as a pencil) up through the hole in the bottom of the printer enclosure and pressing (up) to release the
hopper while simultaneously pulling the hopper out. To re-install the output hopper, simply slide the output
hopper in until it locks in place.
Note •
The output hopper is a very snug fit to prevent it from moving during shipping or
operation; firm force is required to change its position.
Dua
l-Si
ded
Co
lor
Dual-Sid
ed Color