Zebra Technologies Corporation P430I-UHF 用户手册
Installation and Setup
Connecting the Printer to your Computer
980470-001 Rev. A
P430i User’s Manual
21
Connecting the Printer to your Computer
The P430i Printer includes a standard USB interface.
As an option, the printer can be ordered with a 10/100base-T Ethernet Adapter (in addition to the USB
interface). The Ethernet Adapter can also be ordered as an add-on option and installed in the field by a Zebra
factory certified technician.
interface). The Ethernet Adapter can also be ordered as an add-on option and installed in the field by a Zebra
factory certified technician.
1.
If using the USB interface, use the supplied USB cable to connect between the USB connector on the
printer and a USB port on the computer, as shown below. (Note that the figure below shows the optional
Ethernet Adapter directly above the USB Connector; this may not be present on your printer.)
printer and a USB port on the computer, as shown below. (Note that the figure below shows the optional
Ethernet Adapter directly above the USB Connector; this may not be present on your printer.)
2.
If your printer includes the optional Ethernet Adapter as well as the standard USB connection, use either
the supplied USB cable or a standard Ethernet cable to connect the printer to a corresponding port on the
computer or network.
the supplied USB cable or a standard Ethernet cable to connect the printer to a corresponding port on the
computer or network.
Important •
Do not use both USB and Ethernet connections at the same time!
Important •
Intermittent or unpredictable operation may occur from unsecured connectors.
If damaged, the power cable must be replaced by an exact equivalent.
USB Connector
Power
Connector
Connector
Power
Switch
Switch
(Optional)
Ethernet
Connector
Ethernet
Connector