Deister Electronic GmbH TSU200 用户手册
8. Configuration of WebConfig Software
8.1 Preparations
A virtual serial COM port is set up via the USB port. The driver installation is described in
the manual of the SNG 3.
the manual of the SNG 3.
8.2 SNG 3 Interface Converter
The interface converter SNG3 (optional, see 9. “Accessories”) can be used for connecting
a reader to a host/PC via USB. Powering of the reader is carried out by the SNG3 as long
as it is connected to a power supply unit itself. To do so, a special wall power supply is
available (optional, also see 9. “Accessories”). The drivers needed can be found on the
CD within delivery.
a reader to a host/PC via USB. Powering of the reader is carried out by the SNG3 as long
as it is connected to a power supply unit itself. To do so, a special wall power supply is
available (optional, also see 9. “Accessories”). The drivers needed can be found on the
CD within delivery.
SNG 3 Description
Function
TSU 200
Pin 1
+V
CC
supply voltage for TSU 200 (12...24 V/DC)
Pin 1
Pin 2
GND
ground
Pin 3
Pin 3
RS485 - A
RS485 interface, data line A
Pin 2
Pin 4
RS485 - B
RS485 interface, data line B
Pin 4
Connect as follows:
16
Zulassung_wi_en_ts_tsu-200_pro_v140205_te_bf
Power
Supply