Deister Electronic GmbH TSU200 用户手册
8.3 Starting WebConfig
After the successful installation of the virtual COM port driver, run the WebConfig
software. Copy the file "WebConfig.exe" from the supplied CD into a suitable directory on
your local hard disk and open it by double-clicking.
software. Copy the file "WebConfig.exe" from the supplied CD into a suitable directory on
your local hard disk and open it by double-clicking.
The configuration of the "TSU 200" must be carried out as follows:
Step
Configuration Software “WebConfig.”
Reader TSU 200
1
connect reader to
SNG3 (see table page
16), connect SNG3 to
PC via USB cable,
connect wall power
supply to SNG3
SNG3 (see table page
16), connect SNG3 to
PC via USB cable,
connect wall power
supply to SNG3
2
Start configuration software “WebConfig”
3
Select USB Serial Port
4
Click on „Device“ – „Search addresses“
5
Software searches for the reader which is connected to
the selected COM Port
the selected COM Port
6
After successful search the reader found will be indicated
7
Current reader configuration will be read
8
Configuration menu will open
9
Configuration can be modified by user
10
Transfer changed configuration to the reader by clicking
on “Apply Changes”
on “Apply Changes”
11
Reader will store the
new configuration
within its internal non-
volatile memory
new configuration
within its internal non-
volatile memory
12
End connection by clicking on “Offline”
13
Program will be closed by „File“ - „Exit“
Zulassung_wi_en_ts_tsu-200_pro_v140205_te_bf
17