Deister Electronic GmbH TSU200 用户手册
7. Test Mode
The TSU 200 has an integrated test mode for checking the performance of UHF
transponders, and to automatically adapt the unit's antenna to local environmental
conditions. This simplifies alignment of the unit and its adaptation to specific local
circumstances of the application. The test mode can be activated with the test transponder
TPU 3080T (Art. No. 1388.000) within 30 seconds after the unit is switched on. After
activation the antenna is first automatically adjusted. During this adjustment there must not
be any object directly in front of the antenna. Following this, for a period of five minutes,
each transponder in the field will be signalled by the three LEDs and the beeper. Using the
deister test transponder, the specified reading distance in an installed system can be
checked at any time.
transponders, and to automatically adapt the unit's antenna to local environmental
conditions. This simplifies alignment of the unit and its adaptation to specific local
circumstances of the application. The test mode can be activated with the test transponder
TPU 3080T (Art. No. 1388.000) within 30 seconds after the unit is switched on. After
activation the antenna is first automatically adjusted. During this adjustment there must not
be any object directly in front of the antenna. Following this, for a period of five minutes,
each transponder in the field will be signalled by the three LEDs and the beeper. Using the
deister test transponder, the specified reading distance in an installed system can be
checked at any time.
Notification
Status TSU 200
Yellow LED on for 30 seconds after switching on
Waiting for test transponder
Red, green, yellow LED light sequence
Test mode
All LEDs blink, beeper
Transponder read in test mode
Zulassung_wi_en_ts_tsu-200_pro_v140205_te_bf
15