Deister Electronic GmbH TSU200 用户手册
8.3.3 Frequency Setup
Preferred channel
This value defines the preferred channel number before the reader uses another channel.
In a multi-reader environment (EU only), use different channels for the readers. Use the
“Preferred channel” parameter to make this setting. Select the greatest possible separation!
This value defines the preferred channel number before the reader uses another channel.
In a multi-reader environment (EU only), use different channels for the readers. Use the
“Preferred channel” parameter to make this setting. Select the greatest possible separation!
Channel mask
This mask defines the channels to be used by the readers. Each activated checkbox
enables use of the appropriate channel (for further information, see also the section
Fehler: Referenz nicht gefunden “Fehler: Referenz nicht gefunden”).
This mask defines the channels to be used by the readers. Each activated checkbox
enables use of the appropriate channel (for further information, see also the section
Fehler: Referenz nicht gefunden “Fehler: Referenz nicht gefunden”).
Recommendation for configuration of UHF readers (EU only):
If several readers are installed close together (e.g. entry and exit lanes), then channel pairs
should be set up for them, for example, channels 4 and 10, and channels 7 and 13.
If several readers are installed close together (e.g. entry and exit lanes), then channel pairs
should be set up for them, for example, channels 4 and 10, and channels 7 and 13.
8.3.4 Frequencies
ETSI 302 208 v1.2
Channel No. Frequency
E.R.P.
4
865.7 MHz
≤ 2.00 W
7
866.3 MHz
≤ 2.00 W
10
866.9 MHz
≤ 2.00 W
13
867.5 MHz
≤ 2.00 W
FCC Part 15 (US)
Channel No. Frequency
E.I.R.P.
1
902.75 MHz
≤ 4.00 W
2
903.25 MHz
≤ 4.00 W
3
903.75 MHz
≤ 4.00 W
4
904.25 MHz
≤ 4.00 W
...
...
...
47
925.75 MHz
≤ 4.00 W
48
926.25 MHz
≤ 4.00 W
49
926.75 MHz
≤ 4.00 W
50
927.25 MHz
≤ 4.00 W
20
Zulassung_wi_en_ts_tsu-200_pro_v140205_te_bf