JVC KENWOOD Corporation 408000 用户手册
28
s
toriNg
s
implex
f
requeNCies
or
s
taNdard
r
epeater
f
requeNCies
1 Press [VFO].
2 Rotate the Selector (or press [UP]/ [DOWN]) to select your
2 Rotate the Selector (or press [UP]/ [DOWN]) to select your
desired frequency.
• You can also directly enter a desired frequency using the
• You can also directly enter a desired frequency using the
keypad.
3 If storing a standard repeater frequency, select the following
data:
• Offset direction
• Tone function, if necessary
• CTCSS/ DCS function, if necessary
• Offset direction
• Tone function, if necessary
• CTCSS/ DCS function, if necessary
If storing a simplex frequency, you may select other related data
(CTCSS or DCS settings, etc.).
4 Press [F], [MR].
• A memory channel number appears and blinks.
• The “ ” icon appears when the channel contains data.
• Memory channel number L0/U0 ~ L2/U2 {page 38} and Pr
• The “ ” icon appears when the channel contains data.
• Memory channel number L0/U0 ~ L2/U2 {page 38} and Pr
(Priority Channel) {page 40} are reserved for other functions.
5 Rotate the Selector (or press [UP]/ [DOWN]) to select the
memory channel in which you want to store the data.
6 Press [MR] to store the data to the channel.
s
toriNg
o
dd
-s
plit
r
epeater
f
requeNCies
Some repeaters use a pair of reception and transmission
frequencies with a non-standard offset. If you store two separate
frequencies in a memory channel, you can operate on those
repeaters without programming the offset frequency and direction.
1 Store the desired reception frequency and related data by
1 Store the desired reception frequency and related data by
following the procedure given for simplex or standard repeater
frequencies.
2 Rotate the Selector (or press [UP]/ [DOWN]) to select the
desired transmission frequency.
3 Press [F], [MR].