JVC KENWOOD Corporation 408000 用户手册
30
5 Turn the transceiver power OFF, then ON to exit Memory
Storage mode.
To also store a transmit frequency, proceed to step 6; otherwise
proceed to step 10.
6 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to
select the desired transmit frequency.
• The frequency selected in step 3 will be used as a receive
• The frequency selected in step 3 will be used as a receive
frequency.
7 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to
select the memory channel that you selected in step 4.
8 Press [F].
9 Press [PTT] + [MR].
9 Press [PTT] + [MR].
• The selected transmit frequency is stored in the memory
channel, and the memory channel number is incremented.
10 Repeat steps 3 to 5 (simplex) or 3 to 9 (split) to sequentially
store in memory channels.
• Turn the transceiver power OFF, then ON to exit Continuous
• Turn the transceiver power OFF, then ON to exit Continuous
Memory Storage mode.
Note:
◆
◆
If you use Keypad Direct Entry {page 12} to select a frequency in
step 2, you need not press
[ ].
◆
You cannot start Storage mode when in Channel Display mode.
◆
You cannot start Menu mode when in Memory Storage mode.
r
eCalliNg
a
m
emory
C
haNNel
■
Using the Selector (or [UP]/ [DOWN] keys)
1 Press [MR] to enter Memory Recall Mode. The memory
channel last used is recalled.
2 Rotate the Selector (or press [UP]/ [DOWN]) to select your
desired memory channel.
• You cannot recall an empty memory channel.
• To restore VFO Mode, press
• You cannot recall an empty memory channel.
• To restore VFO Mode, press
[VFO].