JVC KENWOOD Corporation 408000 用户手册
29
4 Rotate the Selector (or press [UP]/ [DOWN]) to select the
memory channel you programmed in step 1.
5 Press [PTT] + [MR].
• The transmission frequency is stored in the memory channel.
Note: When you recall an odd-split memory channel, “ ” and “ ”
appear on the display. To confirm the transmission frequency, press
[F],
[7] (Reverse function).
C
oNtiNuously
s
toriNg
i
N
s
implex
or
s
plit
C
haNNels
Using the following procedure will be easier to sequentially store
frequencies and related data in more than one simplex or split
memory channel.
1 Press [PTT] + [MON] + Power ON to enter Memory Storage
1 Press [PTT] + [MON] + Power ON to enter Memory Storage
mode.
2 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to
select the desired frequency and select related data as required
(Tone, CTCSS, DTSS, etc.).
• Pressing
• Pressing
[ ] toggles frequency select (the MHz dot blinks) or
channel select (the channel number blinks).
3 Press [ ] again, then rotate the Selector (or press [UP]/
[DOWN]) to select the desired memory channel.
4 Press [MR].
• The selected frequency and related data are stored in
the memory channel, and the memory channel number is
incremented.