Wulfsberg Electronics Division 2000-UHF1 用户手册
Wulfsberg Electronics
P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A
Page 11 of 37
Selecting the Active Transceiver
To make FM1 or FM2 the “active transceiver” means that the keypad/rotary knobs will perform operations on that
transceiver. The active transceiver is always highlighted in a bright blue color. As shown in the picture below, FM1
is the active transceiver.
transceiver. The active transceiver is always highlighted in a bright blue color. As shown in the picture below, FM1
is the active transceiver.
To make FM1 the active transceiver: Push the FM #1 SELECT BUTTON (shown above). Pushing the FM #2
SELECT BUTTON will make FM2 the active transceiver and the blue highlight will be moved to the FM2 area of
the display (shown below).
SELECT BUTTON will make FM2 the active transceiver and the blue highlight will be moved to the FM2 area of
the display (shown below).
When the P-2000 operating in MODE 1 (only one headset shared between two transceivers), the active transceiver is
the one that will be used for transmitting. In MODE 1, the transceivers (FM1 and FM2) will have their receive
audio summed together and sent to the headset. The operator must choose which transceiver will be used when they
want to transmit.
the one that will be used for transmitting. In MODE 1, the transceivers (FM1 and FM2) will have their receive
audio summed together and sent to the headset. The operator must choose which transceiver will be used when they
want to transmit.
FM #2 Select
FM #1 Select