Prentke Romich Company ACN800PRC 用户手册
Accent 800 Hardware Manual
Page 16
Attaching the Frame More Securely
If you do not expect to remove and reattach the frame to the device frequently, you may want to insert
screws in the top and side holes of the frame. The screws were provided in a small plastic bag of
miscellaneous parts that came with the frame. If you expect to remove and reattach the frame to the
device frequently, you may not want to use the screws.
Note: Before securing the frame, be sure that you removed the two screws that originally filled the screw
Note: Before securing the frame, be sure that you removed the two screws that originally filled the screw
holes on the sides of the device. See “If you choose to secure the frame with screws” on page 18.
1. Place the device face down on a flat
surface.
2. Insert the two small screws through the
holes in the top of the frame and into the
corresponding holes in the device handle.
3. Insert the two larger screws through the
holes in each side of the frame and into
the corresponding holes in the device.
4. Tighten all four screws with a Phillips
screwdriver.
When the Device Frame is Attached Securely
After you attach the frame securely to the device, you can attach a Keyguard or TouchGuide to the
PRELIMINARY