Toshiba IPE002Z 用户手册

 

E6581741 

- 12 - 

Assigning IP addresses (c504, c505-c516) 

The drive needs 3 (4-Modbus TCP) IP addresses. 

*The drive IP address. 
*The subnet mask. 
*The gateway IP address. 
(*The IP Master address.- Modbus TCP protocol only) 

 
These parameters are effective settings at c504 = 0 (IP mode: Manual). 
If the address has been given by a BOOTP or a DHCP server, these parameters are 
invalidity. 
• After dynamic addressing by a BOOTP or DHCP server, the new address value is 

displayed in the parameters. (c524-c535) 

 
They can be provided by: 

*BOOTP server (correspondence between the MAC address and the IP addresses). 
*DHCP server (correspondence between Device Name and the IP addresses). 

 
The address is assigned according to the IP mode parameter. 

c504: IP mode 

0 

The option uses the address defined in c505-c516. 

1 

The option receives its address from a BOOTP server. 

2 

The option receives its address from a DHCP server. 
*Device name contains (c081-c096) a valid name. 

 

Note: The IP mode parameter may be modified according to the configuration control 

attribute of the TCP/IP interface object (CIP standard).