Konica Minolta bizhub C652DS 用户手册

bizhub C652/C652DS/C552/C552DS/C452

7-14

Check that the distance from the starting print position of the test 
pattern to the left edge of the paper (b) is 3.0 mm (+/-0.5 mm).

% Press [+] or [-] to adjust the width. 

Press the [Start] key to print a test pattern.

Press [OK].

Adjust defective print images caused by paper type features.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Printer Adjustment] ö [Media Adjustment].

Select a paper type to be adjusted.

% If defective images exist on the back side of 2-sided copy paper, select [2nd Side].

Press [+] or [-] to specify an adjusted value.

% If missing parts or white spots exist in print images, press [-]. If the surface of the print image is 

rough, press [+].

Press [OK] ö [Close].

Copy, and then check the print image.

Adjust the stapling position for each paper size when printing with the center staple function.

0

Adjust the half-fold position before adjusting the center stapling position.

0

Before making any adjustments, create a sample using the center staple function. Adjust the center 
staple position while checking the created sample.

0

It can be adjusted only when the saddle sticher is installed.

0

When stapling in parallel with the left edge of paper, contact your service representative.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Finisher Adjustment] ö [Center Staple Position].

Select the size of paper of which the center staple position is adjusted.

Press [+] or [-] to adjust the staple position while checking the sample.

Press [OK].

Create a sample, and check the print result.

b

b:3.0mm±0.5mm